Every 2-3 months (time can vary due to water quality in your area) it is recommended to do an internal tank clean. This is done by draining the tank, opening the top maintenance panel, and wiping the inside of the tank with a dry clean cloth. Remove the sieve and water filter to clean around those areas too. Once complete, a manual flush process is required before refilling the tank.

Step One

Open the top-front panel and remove the sieve by pulling it up.

Step Two

Reach inside and pull the filter cap upwards until the filter and the filter adapter are removed.

Step Three

The filter adapter can now be removed by twisting counter-clockwise

Step Four

Re-attach the filter adapter to the new filter. Remove the filter cap from the old filter and attach to the new filter.

Step Six

The filter assembly should sit vertically inside the unit. The sieve should sit on top of the filter cap when inserted correctly. Finally please follow 'Manual Flushing' proceedure here